Key features
- NTP/SNTP server output included on the RJ45 port
- Power supply redundancy
- Priority of synchronisation inputs can be set
- Compensable input line delay and protection against time jumps
- Time base and algorithms ensuring output accuracy down to 50ns for GPS/GNSS synchronisation
- Independence and modularity of output cards
- Alarm feedback via SNMP TRAP (V1, V2C, V3) and by two solid-state relays.
- Manual or automatic compensation of transmission times
Security and network protocols
- Power reserve included by default
- Flash memory backup of configuration settings
- Supervision via SNMP V3 or GT SCADA supervision software or Syslog
- Remote configuration via secure web page
- Command line interface (CLI) for configuration via SSH
- Firmware update via FTP or SCP
- Compatible with IP v4/v6 (compatible with DHCP v4/v6)
- Connections to the web configuration interface via HTTP and HTTP(s)
- Secure access to the web interface via user name and password
- MD5 authentication and encryption protocol
Configuration
- Remote configuration and time setting via an embedded web interface
- Choice of time zone and automatic summer/winter time change on outputs
- IP configuration via buttons on the front panel
- Configuration file can be retrieved and uploaded via the secure web page
- Auto-IP v4
Synchronisation inputs
- GNSS multi-constellations: (GPS, GLONASS, BEIDOU, GALILEO) or GPS
- ASCII (NMEA 0183 RMC or ZDA via autodetection) + TOP
- PPS input
- AFNOR NFS 87-500/IRIG B/ IEEE1344
- NTP (V2, V3, V4) 10/100BaseT
- Frequency input (between 1kHz and 10MHz)
Synchronisation outputs
- Multiple synchronisation outputs
- NTP/SNTP server output included on the RJ45 port
- PPS and 10 MHz outputs on BNC connectors
LEDI® NETWORK ITS V2M 1U
Simple configuration for maximum security
Highly accurate, secure, modular and scalable NTP/PTP time server
Discover our LEDI NETWORK ITS V2M 1U time server, a secure and highly accurate solution for synchronising the time in demanding environments.
Equipped with three redundant synchronisation inputs and multiple synchronisation outputs, this time server ensures exceptional reliability.
Its embedded web server allows for easy and secure configuration. With its battery power reserve and the superior quality of its oscillator, it ensures a stable time code even in the case of loss of synchronisation.
Explore our datasheet to find out how our solution can meet your synchronisation needs.
- AccuracyImage
Most of Internet-based time servers have not the level of accuracy required to be used for synchronisation: our systems feature an accuracy from a hundred of milliseconds down to tens of nanoseconds.
- SecurityImage
Our products use fine corrections in order not to trigger security alerts in the case of loss of reference of the time information. The administrator is notified if a significant offset is detected.
- Continuity of serviceImage
Our time centres and time servers operate redundantly, 24h a day with the hot plug principle. The different racks can be changed while operating without requiring the whole installation to stop.
You may also be interested in these products...
GNSS multi-constellation antenna
This high precision GNSS antena is a synchronisation source for our time servers taking the time from different satellites : GPS, GLONASS, BeiDou, Galileo.
LEDI® NETWORK ITS V2M 2U
Highly accurate, secure 2U time server with triple redundant synchronisation inputs and multiple synchronisation outputs.
LEDI® NETWORK ATS
Highly accurate, secure time server with its internal base capable of providing a stable time signal even in holdover mode over long periods.