Key features
- NTP/SNTP server output included on the RJ45 port
- Power supply redundancy
- Priority of synchronisation inputs can be set
- Time base and algorithms ensuring output accuracy down to 50ns for GPS/GNSS synchronisation
- Independence and modularity of output cards
- Alarm feedback via SNMP TRAP (V1, V2C, V3) and relay
- Control of internal temperature (°C)
Security and network protocols
- Flash memory backup of configuration settings
- Supervision via SNMP V3 or GT SCADA supervision software or Syslog
- Remote configuration via secure web page
- Command line interface (CLI) for configuration via SSH
- Firmware update via FTP or SCP
- Compatible with IP v4/v6 (compatible with DHCP v4/v6)
- Connections to the web configuration interface via HTTP and HTTP(s)
- Secure access to the web interface via user name and password
- MD5 authentication and encryption protocol
- PTPv2 IEEE 1588 (TELECOM, ENERGY profiles) optional
Configuration
- Remote configuration and time setting via an embedded web interface
- Choice of the time zone and automatic summer/winter time change on outputs
- IP configuration via buttons on the front panel
- Configuration file can be retrieved and uploaded via the secure web page
Synchronisation inputs
- GNSS multi-constellations: (GPS, GLONASS, BEIDOU, GALILEO) or GPS
- NTPv4 Ethernet 10/100BaseT on RJ45
- PTPv2 (IEEE 1588)
- ASCII (NMEA 0183 RMC or ZDA via autodetection) + TOP
- PPS input
- Frequency input (between 1kHz and 10MHz)
Synchronisation outputs
- 2 X E1
- Afnor outputs
- ASCII outputs
- PPS outputs
- SMPTE/EBU output
- PTPV2 output
- NTP/SNTP server output included on the RJ45 port
- PPS and 10 MHz outputs on BNC connectors
LEDI® NETWORK ATS
“Grand Master Clock”
Modular PTP Grandmaster Clock with Rubidium oscillator
Discover our top-of-the-range LEDI NETWORK ATS time server, a reliable solution for synchronising equipment of demanding sectors such as the transportation, the defence and the aerospace sector.
Designed with a cutting-edge technology, it uses a rubidium frequency standard and an internal 12-channel GNSS receiver to ensure long-term accurate and stable synchronisation, even in prolonged “holdover” situations.
This grandmaster clock is the most accurate in the LEDI NETWORK range. With its flexible configuration of synchronisation protocols and advanced features, it meets perfectly the needs of demanding environments, while being modular and scalable.
In addition to clocks, it can also synchronise any other device, thus offering a comprehensive and versatile solution. The configuration is carried out via its embedded web server, thus guaranteeing ease of programming and use, as well as enhanced security.
Explore our datasheet to find out how our solution can meet your synchronisation needs.
- AccuracyImage
Most of Internet-based time servers have not the level of accuracy required to be used for synchronisation: our systems feature an accuracy from a hundred of milliseconds down to tens of nanoseconds.
- SecurityImage
Our products use fine corrections in order not to trigger security alerts in the case of loss of reference of the time information. The administrator is notified if a significant offset is detected.
- Continuity of serviceImage
Our time centres and time servers operate redundantly, 24h a day with the hot plug principle. The different racks can be changed while operating without requiring the whole installation to stop.
You may also be interested in these products...
GNSS multi-constellation antenna
This high precision GNSS antena is a synchronisation source for our time servers taking the time from different satellites : GPS, GLONASS, BeiDou, Galileo.
LEDI® NETWORK ITS V2M 1U
Highly accurate, secure time server with triple redundant synchronisation inputs and multiple synchronisation outputs.
RADIO TIMING 4000
Time centre equipped with an intermodule bus, allowing for the redundancy of all outputs for a high level of security.